How To Remove Hood Lift Support

a mechanic opening the hood of a car

Tabular array of Contents

1. Become Help From A Friend

2. Remove The Current Struts

3. Remove The Strut Ball

iv. Install The New Strut

To ensure the undecayed performance of your hood lift supports, it'due south always important to replace them if there are signs of article of clothing and tear on the hinges, connection points, or any twisting that is acquired by uneven loading. If the struts on the hood of your motorcar are failing and you want to install a new hood lift support, you can easily do so yourself. Installing new supports will ensure the reliability and performance of your vehicle, as well as your condom when working under the hood. At Lift Supports Depot, nosotros offer the world's largest lift support database so you tin easily find the right replacement gas struts or parts you lot demand for a complete installation.

Here nosotros provide the step-by-step instructions you lot demand on how to replace hood struts.

infographic-howtoinstallliftsupports-liftsupportsdep

1. Get Assist From A Friend

a man holding open the hood of a car while his friend works on the car

Yous won't be able to hold upwardly the hood while you install the aftermarket hood lift, and so you will need to notice someone to assistance you. You can besides use the hood back up bar if your car has ane. Never apply a prop stick to concur up the hood, as it could easily autumn off or break. If the hood were to fall on you during installation, it could cause serious injury.

2. Remove The Current Struts

a man reaching toward a hood lift to remove it

You will demand to remove the hood lift installed on your vehicle. Yous can do this by removing 1 and replacing information technology with the new lift support before removing and replacing the other. Yous will need to utilize a flathead screwdriver to remove the retaining clips, then the struts themselves.

3. Remove The Ball of The Strut

a woman looking under the hood of her car

Once you lot have removed the strut, you will need to remove the fastener that connects the elevator support to the body of the car. Use the flathead screwdriver to pry off the brawl of the strut. This removes the entire hardware.

4. Install The New Strut

a vintage car with its hood open

One time you have removed the strut, you lot will need to remove the fastener that connects the lift support to the body of the machine. Use the flathead screwdriver to pry off the ball of the strut. This removes the entire hardware.

To install your lift supports, yous will want to put the hood elevator in place but not tighten it down. You will need to employ your fingers to add pressure to the ball of the new strut to guide it into place. Install both struts i at a time, then tighten them both downwards.

In one case you know how to replace hood struts and take successfully installed your new hood lift, yous tin can have the peace of mind of knowing that you lot are using a quality production that will last for many years. Lift Supports Depot has been in business for over 40 years and provides parts that take been tested for reliability and functioning. If you happen to run into whatsoever problems, we provide personal customer support to assist guide you through the process. Contact us with any questions you might have most your parts or the installation process.